• Document Imaging
  • Digitizing & Archiving
  • Post Printing Finishing Solutions
  • Multimedia
  • Office Automation

Welcome to our Official Website

Your Digital Imaging & Print Systems Integrator

paper collater

Galaxy Automation
Your Digital Imaging & Print Systems Integrator

Product Highlight

img img

On-demand Print Finishing Solutions

  • Perfect Binding Solutions for Soft and Hard Cover Books
  • Lay-flat Coffee Table and Photobook Solutions
  • Book Repairing Solutions
Play for Demo Videos!


Get In Control!

Offer your customers unparalleled quality and fast turnaround with Galaxy's

On-demand Print Finishing Solutions!

NEW! Introducing the latest from Fastbind, the new C500™ heavy-duty creaser with new innovations to make large format creasing easier than before.


More News »


Suction Paper Collator

UCHIDA Collator UC-1100 efficiently collates a wide variety of papers at the maximum cost performance. The center feed system eliminates the need to re-position the booklet maker and trimmer each time the paper size is changed. You can now install the system in a permanent station. Naturally, UCHIDA's reliable paper feed system, proven throughout the world, has been kept in the same precise structure as it is constructed. The UC-1100 can also be connected by signal with major booklet makers available in the market. It is suitable not only for professional printer applications but also for in-house printing, quick copy/ print shops, schools, and many other uses. .


User-friendly operation panel

The operation panel has been upgraded and redesigned to make work easier. It shows the status of operation in any operation mode. Also, errors and their locations are indicated for quick corrective action.

Detachable large feed tray

The paper feed tray is easily detached to facilitate replacement of the feed roller and separator and removing jammed paper. It is designed longer to be able to load larger format paper, such as A3SR paper, without requiring an optional auxiliary tray.

Center feed tray

The paper is set in the center position on the feed tray by the centering guides, which eliminates the need to re-position the booklet maker and trimmer when different size paper is loaded.

Quick setting of paper feed pressure

The paper feed pressure lever is relocated on the outside of the UC-1100 so that it enables the operator to adjust the pressure level much easier. The paper feed and separator pressures can be adjusted easily and quickly without detaching the feed tray.

Stacking table for various paper sizes

The stacking table was redesigned to stack small format paper, such as A5 paper, without attaching an auxiliary table. It alternately shifts direction in a crisscross pattern that can stack large sized stock, such as A3SR paper crisscross, more efficiently than conventional offset stackers.

Two collators can be linked

Two UCHIDA UC-1100 collators can be linked via an optional transport unit, enabling their use in tandem for purposes of collecting a larger number of pages (maximum 20 sheets). The two machines can be used separately while connected.

Connection with booklet makers

UC-1100 can be connected with the most major booklet makers in the market. They exchange error signals each other to stop operation of the other when it made an error. This minimizes paper waste



Number of stations

10 stations (10 stations X 2 towers connectable)

Paper size

Maximum size : 328 x 469 mm (A3SR)(12.9" x 18.5")
Minimum size : 95 x 150 mm (Post card)(3.8" x 5.9")

Paper quality

1st & 10th station 35 to 210g/m2
2nd to 9th station 35 to 160g/m2 
Offset paper, copy paper, NCR paper


40 or 60 set/minute selectable (A4 paper)

Paper feed system

Center feed with friction roller system

Station capacity

28mm (approx. 350 sheets of 64g/m2 paper) (1.1")

Paper stacking system

Straight or criss-cross stacking
stacking capacity 65mm (approx. 880 sheets of 64g/m2 paper)(2.6")


Both 4 digits addition and preset subtraction

Feed error detection

Empty feed, paper jam, double feed, no paper

Other detection

Stacker full, paper eject jam, back door open, station in use, paper check at each stastion, after processing unit error by signal relay

Programming mode

Alternate collation mode
Insersion mode
Program insersion for slip booklet mode
Program insertion for front and back cover mode

Connection to booklet maker


Power source

110, 117, 220, 230 or 240VAC, 50 or 60Hz

Power consumption



545(W) x 740(D) x 1,056(H) mm(21.5"(W) x 29.1"(D) x 41.6"(H)


76Kg (167.5 lbs)

Standard accessories

Paper feed table, Straight/Chriss-Cross stacker

Optional accessories

Height Fixed collator table
Connecting cable with connector for booklet makers